304L Stainless Steel Pipe Fitting Equal Tee of production and processing methods

　　SCH10 pipe 304L stainless steel pipe fittings equal tees are mainly used for branch pipes of practical main pipelines to change the direction of fluids. It is also called a pipe tee or tee fitting. The main processing methods for SCH10 pipe 304L stainless steel pipe fittings equal diameter tees are as follows:

　　1.Forging That is, a forging press (rotary type, connecting rod type, roller type) is used to punch the end or part of the pipe to reduce the outer diameter.

　　2. Stamping Use a tapered core to expand the tube ends to the desired size and shape. This operation is performed on a punch press.

　　3. Stack For round edge processing, place the core inside the tube and push the outer circumference with a roller.

　　4. Scroll It is suitable for the inner round edge of thick-walled pipes and generally does not require a mandrel.

　　5. Bulging There are two main methods: put the rubber into the tube and press it with a punch at the top to expand the tube; fill the middle of the tube with liquid and rely on the pressure of the liquid to bulge the tube into the desired shape.

　　In addition, there is another processing method that uses molds to produce SCH10 pipes and 304L stainless steel pipe fittings with equal diameter tees. The mold includes upper mold and lower mold. The lower mold is equipped with an upper processing cavity, and the upper mold is equipped with a processing block that matches the shape of the processing cavity. The processing cavity is T-shaped and horizontal.

　　In addition to the T-shaped intersection, the intersection of the machined cavity sections is semicircular, and the section opening is located on the upper surface of the lower mold, thus changing the SCH10 Pipe 304L Stainless Steel Pipe Fitting Equal Tee, combining the two semicircular tee fittings Processed one by one. The openings of the two are welded, and the opening of the pipe joint is welded to increase the contact surface between the two and reduce the difficulty of welding. In addition, the semi-circular tee fitting is easy to place on the ground without shaking, further improving processing stability. It avoids the tendency of traditional nozzles to roll during processing.

　　The processing methods of reducing tees are different. Professional processing equipment such as metal rods, pushers, commutators, brackets, etc. should be used. During operation, in order to form a tee blank, the metal rod is heated, pushed out with a jack and metal rod, the pipe wall material is poured out naturally, and then the corresponding pipe section of a certain length is welded to the injection-molded reducer. The pipe fitting tee blank is produced for this product.

　　The special processing equipment used in the processing method of reducing tee fittings has a simple structure and low cost.

　　The manufacturing of SCH10 Pipe 304L Stainless Steel Pipe Fitting Equal Tee does not require additional injection molding machines and injection molds, which can reduce the production cost of such pipe fittings and increase output. Therefore, this processing method is suitable for processing tee fittings of different specifications and diameters.