Regular inspection is required after installation of stainless steel elbow

　　When installing the stainless steel elbow, the stainless steel elbow can be directly installed on the pipeline according to the connection mode, and installed according to the use position. Generally, it can be installed at any position of the pipeline, but it is necessary to facilitate the inspection of the operation. Pay attention to the flow direction of the medium of the cut-off ASME B16.9 Butt Welded Stainless Steel Elbow is from the bottom of the longitudinal valve flap to the top, and the stainless steel elbow can only be installed horizontally. When installing the stainless steel elbow, pay attention to the leakproofness to prevent spillage and affect the normal operation of the pipeline.

　　The stainless steel elbow needs to be inspected on schedule for a period of time. The exposed processing surface must be kept clean, and the dirt shall be removed. It shall be stored in a clean and dry place indoors. It is strictly prohibited to stack or store in the open air. Always keep the stainless steel elbow dry and ventilated, keep the device clean and tidy, and store according to the accurate storage method.

　　Stainless steel elbow processing is based on the power of conventional or special stamping device, so that the plate can directly bear the deformation force in the mold and carry out deformation, so as to obtain the production skills of certain shape, scale and function of commercial parts. Sheet metal, die and its device are the three elements of stamping. Because stainless steel elbow pipe has the advantages of inner wall lubrication, small resistance of heat medium movement, acid and alkali resistance, long service life, convenient installation, etc.

　　The bolts of the packing gland of stainless steel elbow valve shall be tightened evenly, and shall not be pressed into a skew state, so as to avoid being damaged and hindering the stem movement or causing leakage.